VAPOR/ SMOKER WITH ANEL ELECTRIC HEATER WITH 7.4V 6000MAH BATTERY (FOR USE WITH VAPOR PADS)

In order not to create a flame - risk of fire when using with Cool Smoke pellets.

Caution

When combined with Cool Smoke pellets do not remain inactive/unmoved without blowing air for more than 15 Minutes.

Shake the device lightly every 5-10 minutes.When 50% of the pellets turn black you should replace them. When more than 50% of the pellets are black, the extinguishing capacity of the material has decreased and should be replaced.

Be very careful when emptying the pellets as they are still hot and if they come into contact with flammable materials (e.g. dry grass) a fire may occur.

Before emptying the contents of the smoker make sure it has come to room temperature.The device must under no circumstances be left unattended during operation.

Do not lay the device to the right, left, backwards or more than 45° forwards.

How to choose a battery:

The available battery types send different current to the resistor which provides the corresponding temperature to the vaping, hybrid vaping or smoking materials. Select from table 1 the batteries and the type of your programmer accordingly:

1) With the type of device you have (the type is indicated on the lower right part of the back of the bellows, see figures below)

2) if you will use VP , CS

3) if you equip the device with the optional Device Operation Programming accessory SHDTBC-XX-XX-XX .

4) whether to use conventional materials